Control behaviour of the input/output shift registers for state machine 1
| AUTOPUSH | Push automatically when the input shift register is filled |
| AUTOPULL | Pull automatically when the output shift register is emptied |
| IN_SHIFTDIR | 1 = shift input shift register to right (data enters from left). 0 = to left. |
| OUT_SHIFTDIR | 1 = shift out of output shift register to right. 0 = to left. |
| PUSH_THRESH | Number of bits shifted into RXSR before autopush or conditional push. Write 0 for value of 32. |
| PULL_THRESH | Number of bits shifted out of TXSR before autopull or conditional pull. Write 0 for value of 32. |
| FJOIN_TX | When 1, TX FIFO steals the RX FIFO’s storage, and becomes twice as deep. RX FIFO is disabled as a result (always reads as both full and empty). FIFOs are flushed when this bit is changed. |
| FJOIN_RX | When 1, RX FIFO steals the TX FIFO’s storage, and becomes twice as deep. TX FIFO is disabled as a result (always reads as both full and empty). FIFOs are flushed when this bit is changed. |